↵
Product Overview
The Column And Connector Plate Production Line manufactures cold-formed structural columns and matching steel connector plates. Its output is used for vertical silo stiffeners, industrial support assemblies, warehouse racking sections and other bolted metal structures that require accurately positioned joining holes.

Key Features
45# Steel Shafts for Thick Sections
Main shafts made from 45# steel support a published sheet-thickness range of 3.0–6.0 mm. Under repeated forming loads from heavy-gauge structural steel, the solid shaft arrangement holds roller positioning as the strip progresses into a column or upright cross-section.
Multi-Station Punches for Matched Connections
The hydraulic punching assembly produces the bolt-hole groups used by structural connection plates. At a column splice where the upright web and a backing plate must accept the same bolt set, repeatable die positioning keeps the corresponding holes aligned.
8–12 m/min PLC-Driven Forming
The specified profile speed is 8–12 m/min, controlled by PLC and frequency conversion. When manufacturing multiple upright lengths to one section, the drive and cut-to-length sequence maintains the cross-section while changing the finished member length according to the production setting.

Custom Column And Connector Plate Production Line
The machine is engineered from a signed profile, connecting-plate layout and forming-material specification. Yuanding designs the roll passes and hydraulic die arrangement in its Wuxi plant, with line length, control settings and equipment identification established for the final installation.
Customizable Items
- Column web width
- Flange width / return
- Section bend radii
- Connector-plate geometry
- Material grade
- Thickness selection
- Member cut length
- Bolt-hole gauge
- Hole center spacing
- Piercing / slot locations
- Surface finish requirements
- Factory voltage / branding
Key Specifications
| Material Thickness | 3.0mm – 6.0mm |
|---|---|
| Profile Speed | 8 – 12m/min |
| Punching Unit | Multi-station hydraulic punching |
| Main Shaft Material | 45# High-grade steel |
| Control System | PLC with frequency conversion |
Quality Control
Incoming shaft, roller and die steels are matched to their material certificates. Welded frame components and purchased pneumatic, hydraulic or electrical units are inspected for the specified sizes and nameplate data.
The frame is checked for mounting-face accuracy before roller installation; shaft-seat runout and the heat-treated punch faces are inspected as separate operations. Cabinet wiring and the frequency-controlled drive are tested against the as-built electrical layout.
The finished line forms trial columns and connecting plates using representative material. Width, flange angle, hole centers, cut ends and the fit of mating components are checked before the signed factory test record is completed.
FAQ
Q: Can one machine be ordered?
A: Yes. The MOQ is one set.
Q: Which export terms do you support?
A: EXW, FOB and DDP.
Q: How are different column sections accommodated on one line?
A: Related sections use interchangeable forming rollers or adjustable spacers.
Q: What material and heat treatment are used for the punching dies?
A: Vacuum-quenched Cr12MoV tool steel.
Hot Tags: column and connector plate production line, China column and connector plate production line manufacturers, suppliers, factory, site assembled steel silo, steel silo iot monitoring system, steel silo modular assembly, steel silo quality preservation storage, steel silo smart monitoring system, steel silo storage tank