Product Overview

 

Primary Function: Serves as the central mechanical drive, frame, and control platform for industrial molding and shaping lines. It synchronizes clamping, pressing, or continuous forming actions while maintaining dimensional stability under thermal and mechanical loads.


Processing Materials: Thermoplastics (PVC, TPU, PE, PP), rubber compounds (EPDM, NBR), and specialized polymer composites.


Target Industries & Customers: Tier-1 automotive parts manufacturers, industrial seal extrusion plants, polymer profile custom molders, and turnkey extrusion line integrators.

 

 
  • Corrugated Sheet Forming Machine
    The Yuanding Corrugated Sheet Forming Machine is a coil-fed roll forming system for producing corrugated metal sheets. It serves manufacturers of roofing and wall cladding for industrial buildings,
  • Roof Panel Forming Machine
    The Yuanding Roof Panel Forming Machine converts metal coil into profiled roofing sheets for residential roofs, commercial buildings and industrial facilities. It is used in roof-sheet production
  • Wall Panel Forming Machine
    The Yuanding Wall Panel Forming Machine is a cold roll forming line for metal wall cladding. Its profiled sheets are used in factory envelopes, warehouse walls, commercial facades and prefabricated
  • Double-layer Molding Machine
    The Yuanding Double-layer Molding Machine is a vertically arranged roll forming system with two panel-forming levels. It is used by metal building component manufacturers producing different roof or
  • Glazed Tile Forming Machine
    The Yuanding Glazed Tile Forming Machine produces tile-profile metal roofing from sheet coil. The resulting roofing is used on houses, villas, park structures and public buildings where the roof
  • Ridge Cap Roll Forming Machine
    The Yuanding Ridge Cap Roll Forming Machine forms sheet metal into roof-ridge cover profiles. It is used in roofing accessory production for industrial buildings, warehouses, residential roofs and
  • Automatic Fan-shaped Slitting Machine
    The Yuanding Automatic Fan-shaped Slitting Machine prepares fan-shaped sheet blanks from metal stock. It is used in architectural sheet-metal production for tapered roofing layouts, steel building
  • Arc-shaped Water Tank Machine
    The Yuanding Arc-shaped Water Tank Machine is a roll forming system for curved-section metal gutters and water-collection channels. It is used in building drainage component production for roof
  • Decorative Buckle Panel Forming Machine
    The Yuanding Decorative Buckle Panel Forming Machine shapes metal strip into decorative panel sections with folded attachment edges. It serves manufacturers of metal ceiling and interior lining
  • Downpipe Forming Machine
    The Yuanding Downpipe Forming Machine is a coil-fed system for manufacturing metal rainwater downpipe sections. It is used in drainage-component workshops supplying residential, commercial and
  • Floor Decking Forming Machine
    The Yuanding Floor Decking Forming Machine produces profiled steel decking from coil. Also described as a floor deck forming machine, it serves steel building component plants supplying floor systems
  • C Purlin Forming Machine
    The Yuanding C Purlin Forming Machine converts steel strip into C-shaped structural sections. It is used in purlin production for factory buildings, warehouses and prefabricated steel structures, as
First 12 Last
 

Product Types & Configurations

 

 

Series MM-H (Hydraulic Clamping):

High-tonnage operations, deep-cavity parts, and high-pressure rubber vulcanization lines. Features closed-loop hydraulic pressure regulation.

 

Series MM-S (Servo-Electric Drive):

Precision electronic shaping, cleanroom environments, and applications requiring high repeatability (±0.02 mm) with energy efficiency.

 

Series MM-M (Modular Custom Base):

Engineered-to-order frames designed to integrate specific proprietary tooling, third-party extruders, or multi-axis auxiliary units.

 

 

 
Key Specifications
 
01/

Forming Mechanism: Hydraulic toggle / Direct servo screw actuation / Pneumatic assist.

02/

Clamping/Pressing Force: 50 kN to 2,000 kN (configurable per model).

03/

Platen / Working Bed Dimensions: From 400 × 400 mm up to 1,500 × 2,000 mm (custom machining available).

04/

Drive & Power Unit: 7.5 kW to 90 kW main drive motors; variable displacement pumps or brushless servo motors.

05/

Control Architecture: Siemens S7-1200/1500 or Beckhoff PLC with 15-inch industrial multi-touch HMI; Ethernet/IP and Profinet fieldbus support.

06/

Utility Requirements: 380V/415V, 3-phase, 50/60Hz; cooling water flow rate 20–80 L/min at 0.3 MPa.

 

Corrugated Sheet Forming Machine

 

Applications

Material Compatibility: Extruded rubber profiles, thermoplastic elastomer (TPE) tubes, sheet-molded composites, and high-density foam structures.


Core Processing Steps: Compression molding, transfer molding, continuous profile calibration, and inline thermal shaping.


Production Environments: 24/7 continuous industrial manufacturing lines and high-mix, low-volume custom manufacturing cells.

 

 
 
Customization & Options

Tooling Interfaces:

T-slot or tapped-hole clamping plates machined to ISO/JIS standards.

Feeding & Take-off Integration:

Mechanical linkage ports for automated pneumatic feeders, pullers, and cutters.

Thermal Control:

Integrated multi-zone cartridge heater controllers or external oil/water temperature control unit (TCU) docks.

Safety Packages:

Interlocked perimeter guarding, optical light curtains, and redundant hydraulic dump valves meeting CE/OSHA safety standards.

 

Manufacturing & Quality Control
 
 

Machining Precision:

Main frames are welded from structural steel plates (Q355B or equivalent), annealed to eliminate residual stress, and finish-machined on CNC floor boring mills to maintain parallelism within 0.05 mm/m.

 
 
 

Assembly Standards:

Hydraulic manifolds are pressure-tested at 1.5 times operating pressure; electrical wiring complies with NFPA 79 / IEC 60204-1 standards.

 
 
 

Factory Acceptance Testing (FAT):

Every unit undergoes a 72-hour dry-cycle run test, thermal stability check, and load simulation before crating. Test reports and material mill certs are shipped with the documentation package.

 

 

 

Ordering, Logistics & Technical Support

Engineering Consultation: Submit your part drawings, cycle time targets, and clamping force calculations to our engineering team for technical validation.


Export Packaging & Shipping: Fumigation-free wooden crating with vacuum moisture-barrier sealing and shock-absorbent mounting, shipped FOB/CIF from major export ports.


Installation & Commissioning: On-site mechanical leveling, utility hookup supervision, and PLC communication handshake support provided by factory field engineers.


Documentation & Warranty: Comprehensive English manual set including electrical schematics, hydraulic piping diagrams, PLC tag lists, and consumable spare parts lists. Backed by a 12-month standard warranty on core mechanical and electrical assemblies, with critical replacement components stocked for 48-hour global dispatch.

Ridge Cap Roll Forming Machine

 

 

Frequently Asked Questions

 

 

Q: What is the standard lead time for a custom Molding Main Unit?

A: Standard modular units ship within 8 to 10 weeks. Fully custom-engineered units with non-standard bed sizes or specialized hydraulic circuits require 14 to 18 weeks from drawing approval.

Q: Can this unit integrate with our existing upstream extruder or downstream puller?

A: Yes. The control architecture includes standard digital/analog I/O and industrial Ethernet protocols (Profinet/Modbus TCP) to establish interlocks and speed synchronization with third-party line equipment.

Q: What tolerance is maintained on the platen parallelism under full load?

A: Under maximum rated clamping force, platen parallelism deflection is restricted to less than 0.05 mm across the diagonal span, preventing flash and premature mold wear.

Q: Are the hydraulic components sourced globally or restricted to specific brands?

A: Standard hydraulic manifolds, pumps, and valves utilize globally interchangeable brands such as Rexroth, Parker, or Yuken to ensure local spare parts availability for overseas plants.

Q: What electrical standards are followed for export units?

A: Export units are built to CE compliance or UL/NFPA 79 compliance standards, utilizing domestic terminal blocks, wire labeling, and enclosure ratings (IP54 / NEMA 12) specified during order entry.

Q: How is the machine protected against thermal expansion during long runs?

A: Main frames incorporate symmetrical stress-relieved ribbing, and precision guide pillars feature thermal clearance margins to maintain alignment accuracy during continuous operating temperatures up to 80°C.

 

modular-1
Request a Quote

To provide an accurate technical proposal and commercial quotation, please supply the following parameters:
1. Required Clamping / Pressing Force: e.g., 200 kN / 500 kN
2. Platen / Bed Working Area: Length × Width in mm
3. Daylight Opening & Stroke Requirements: Max opening / Working stroke
4. Drive Preference: Hydraulic / Servo-Electric
5. Control System Preference: Siemens / Allen-Bradley / Open Architecture
6. Target Material & Processing Temperature: e.g., EPDM rubber at 180°C
7. Destination Port / Facility Location: For freight and compliance calculation

We're well-known as one of the leading molding main unit manufacturers and suppliers in China, also support customized service. Please feel free to buy advanced molding main unit made in China here from our factory. For pricelist, contact us now.

Double layer Molding Machine, Ridge Cap Roll Forming Machine, Decorative Buckle Panel Forming Machine
Send Inquiry