Floor Decking Forming Machine

Send Inquiry
Floor Decking Forming Machine
Details
The Yuanding Floor Decking Forming Machine produces profiled steel decking from coil. Also described as a floor deck forming machine, it serves steel building component plants supplying floor systems for factories, warehouses, logistics facilities, commercial buildings and other steel-framed construction projects.
Category
Molding Main Unit
Share to
Description

Product Overview

 

The Yuanding Floor Decking Forming Machine produces profiled steel decking from coil. Also described as a floor deck forming machine, it serves steel building component plants supplying floor systems for factories, warehouses, logistics facilities, commercial buildings and other steel-framed construction projects.

product-1920-1080

Core Advantages

 

 

Progressive Forming Across the Deck Section

An 18–26-station forming train covers a sheet range of 0.4–1.5 mm. When the strip develops the deck's ribs and connecting flats, successive passes distribute the bending work along the line, controlling the transition from a wide flat strip to the finished deck section.

Structural Support Beneath the Roll Train

An H300–450 base configuration supports forming shafts of 70 or 80 mm diameter. Under the repeated bending loads of ribbed deck production, the base and shafts support the working positions of the rollers, maintaining the tooling relationship from the first stand to the final forming pass.

Variable Forming Pace for Repeated Deck Lengths

The 7.5–15 kW variable-frequency drive supports a forming-speed range of 15–25 m/min. During repeated runs of one deck profile, the operator selects the running pace for the production schedule instead of being limited to one fixed motor-speed setting.

Guided Cutoff Through Ribbed Steel

Heat-treated Cr12MoV tools cut the formed deck in a rear shear guided by two cylindrical rails. At each cutoff, the guide structure controls the blade path through the ribs and flat regions, limiting movement of the cutting assembly under the changing section load.

 

product-1080-810

Custom Floor Decking Forming Machine

Supply the deck-section drawing, material specification and required production layout. Yuanding develops the roll sequence and equipment arrangement for approval, then manufactures the tooling and line around the selected floor-deck system.

Customizable Items

  • Deck rib height
  • Rib pitch and flat widths
  • Side-lap configuration
  • Cover width
  • Embossing features where specified
  • Coil loading capacity
  • Automatic stacking arrangement
  • Control system and site power

Key Specifications

 

Parameter

Specification

Material Thickness

0.4 – 1.5 mm

Forming Stations

18 – 26 stations

Forming Speed

15 – 25 m/min

Motor Power

7.5 – 15 KW (Variable Frequency)

Drive Method

Motor drive, gear & chain transmission

Blade Material

Cr12Mov (heat treated)

Frame Size

H300 – 450

 

Quality Control

 

 

Incoming inspection verifies structural steel, tooling stock and purchased components against the build specification. Material certificates and heat numbers establish traceability through machining and final machine assembly.

Tool contours are measured against their drawings, and shaft roll-seat runout is checked to a 0.05 mm total indicated runout limit. The unloaded assembly is inspected for station alignment, drive engagement, connection integrity and control response.

The loaded acceptance run measures the output section and cut length using representative project coil. Trial evidence and the signed measurement record are tied to the machine serial number, and release takes place before shipment.

 

FAQ

 

 

Q: How is the machine packed for export?

A: The main equipment is normally uncrated; small components are packed in wooden boxes.

Q: Which currencies do you accept?

A: USD and EUR.

Q: Which roller surface finish is used for deck production?

A: Heat-treated rollers with hard-chrome plating and a mirror-polished working surface.

Q: How is deck length measured for automatic cutting?

A: An encoder supplies the strip-travel signal to the PLC for cut-to-length control.

Hot Tags: floor decking forming machine, China floor decking forming machine manufacturers, suppliers, factory, Door Frame Forming Machine, Floor Decking Forming Machine, Roller Shutter Forming Machine, Corrugated Sheet Forming Machine, molding main unit, C Purlin Forming Machine

Send Inquiry