Product Overview
The Yuanding Arc-shaped Water Tank Machine is a roll forming system for curved-section metal gutters and water-collection channels. It is used in building drainage component production for roof edges, industrial facilities and other projects requiring formed sheet-metal channels.

Core Advantages
Progressive Development of the Curved Section
Successive roll pairs develop the curved channel shape from flat strip. As the bottom and side regions are formed, the section grows through a sequence of bends rather than one deep press stroke. This continuous forming approach maintains the same cross-sectional geometry along the channel's production length.
Mechanically Linked Roll Drive
The machine uses a motor-driven gear-and-chain transmission. During a continuous channel run, the linked drive carries motion through the forming sequence so the strip advances through successive roll contacts. The forming stages work as one driven path instead of depending on individually hand-fed operations.
Variable-Frequency Adjustment During Setup
Frequency conversion provides electrical adjustment of the forming drive. When threading a new coil or establishing the first channel section, the operator sets a controlled running pace and then changes to the selected production setting without exchanging gears or modifying the roll-forming sequence.

Custom Arc-shaped Water Tank Machine
Provide the channel cross-section, a sample and the mating drainage-system details. Yuanding develops the roll geometry and general arrangement from the approved section, then manufactures the forming tools and line to the specified material and workshop requirements.
Customizable Items
•Channel opening width
•Channel depth
•Bottom curvature
•Front-edge bead or hem
•Rear-edge configuration
•Feed-strip specification
•Coil-handling arrangement
•Discharge support layout
Key Specifications
|
Parameter |
Specification |
|
Material Thickness |
0.4 – 0.8 mm |
|
Forming Stations |
18 – 26 stations |
|
Forming Speed |
15 – 25 m/min |
|
Motor Power |
7.5KW – 15KW (with frequency conversion) |
|
Drive Method |
Motor drive, gear chain transmission |
|
Blade Material |
Cr12Mov (heat-treated) |
|
Machine Base |
H300-450 |
Quality Control
Incoming material and component inspection establishes the build's material identity and equipment specification. Steel and tool-stock records remain traceable to the machine serial number through machining and assembly.
Tool contours and mounting positions are checked against the approved drawings. Before the material trial, the assembled line is inspected for drive alignment, hydraulic leakage and wiring conformity so setup faults are resolved independently of the finished-section assessment.
The acceptance run checks the formed channel and cut ends using representative project material. Measured output and the trial recording accompany the factory acceptance record; third-party attendance is available when included in the purchase order.
FAQ
Q: What are the payment terms?
A: 30% advance payment and 70% balance.
Q: Can you supply a formed-channel sample?
A: Retained trial-run pieces of standard sections are free when available.
Q: Are outlet holes and end caps produced by roll forming alone?
A: Outlet openings and end caps require separate fabrication operations.
Q: What assistance is available when the machine arrives?
A: Yuanding provides on-site installation and commissioning or video guidance.
Hot Tags: arc-shaped water tank machine, China arc-shaped water tank machine manufacturers, suppliers, factory, Door Frame Forming Machine, Floor Decking Forming Machine, Roller Shutter Forming Machine, Corrugated Sheet Forming Machine, molding main unit, C Purlin Forming Machine