Product Overview
The Yuanding Door and Window Track Forming Machine produces roll-formed metal guide-track sections from strip. Also described as a door and window guide rail forming machine, it is used in component production for sliding doors, windows and related architectural opening systems.

Core Advantages
Guided Strip Entry for Narrow Sections
Adjustable positioning plates and upper and lower feed guides establish the incoming strip path. When a narrow track section is threaded into the first stand, the supported entry limits sideways movement that would shift the channel features relative to the strip edges.
80 mm Shafts Supporting the Forming Tools
The forming assembly uses 80 mm diameter 45# steel shafts. During successive channel-forming passes, the shafts support the paired rollers against the bending loads, maintaining the working relationship of the tools that shape the track walls and running surfaces.
Hydraulic Front Cut for Material Preparation
A hydraulic shear is located at the material entry. At coil replacement, the strip is cut before the forming sequence rather than separated inside a partly developed track section, giving the operator a defined preparation point for introducing the next material length.
PLC Scheduling for Different Track Lengths
PLC control handles production length and quantity while the variable-frequency drive sets the forming pace. When an order changes from one opening size to another using the same track section, the operator updates the length schedule without marking each component individually.

Custom Door and Window Track Forming Machine
Submit the track drawing and mating roller or sash detail with the strip specification. Yuanding develops the roll-pass design and machine arrangement from the approved guide geometry, then manufactures the tools and line for that opening system.
Customizable Items
•Track width
•Channel depth
•Running-surface shape
•Guide-lip geometry
•Flange and return dimensions
•Inside bend radii
•Coil-handling layout
•Power supply and control interface
Key Specifications
|
Parameter |
Specification |
|
Material Thickness |
0.4 – 0.8 mm |
|
Forming Stations |
18 – 26 stations |
|
Forming Speed |
15 – 25 m/min |
|
Motor Power |
7.5KW – 15KW (with frequency conversion) |
|
Drive Method |
Motor drive, gear chain transmission |
|
Blade Material |
Cr12Mov (heat-treated) |
|
Machine Base |
H300-450 |
Quality Control
Material certificates and component nameplates are checked against the machine's purchase specification. The inspection record preserves material and component identity through the machining and assembly stages.
Tool contours are inspected against their machining drawings, and shaft roll-seat total indicated runout is limited to 0.05 mm. That shaft criterion is recorded separately from the acceptance dimensions of the finished track.
A loaded trial checks the formed section and cut ends using representative material. Electrical response, measured output length and the section-inspection results are included in the factory acceptance record before dispatch.
FAQ
Q: What are the payment terms?
A: 30% advance payment and 70% balance.
Q: Can you provide a track sample?
A: Retained trial-run pieces of standard track profiles are free when available.
Q: Which PLC brands are used for the track line?
A: Yaskawa or Schneider.
Q: What assistance is available for operating faults?
A: Yuanding provides technical consultation and troubleshooting support.
Hot Tags: door and window track forming machine, China door and window track forming machine manufacturers, suppliers, factory, Door Frame Forming Machine, Floor Decking Forming Machine, Roller Shutter Forming Machine, Corrugated Sheet Forming Machine, molding main unit, C Purlin Forming Machine