Product Overview
The Unpowered Decoiler is a passive coil pay-off machine for externally driven sheet-processing lines. It is used with levelers, feeders and shearing equipment in low-speed or small-batch production, supplying coiled strip to the downstream machine that controls material advance.

Key Advantages
Pull-off rotation without a motor or reducer
The mandrel rotates on bearings under external strip traction. When the downstream feeder already provides the pulling force, the decoiler supplies material without adding an active reel motor or gearbox that must be synchronized with that feeder.
Hydraulic four-segment expansion
A rear hydraulic cylinder operates a pull rod connected to four expanding plates. During mounting of a new coil, hydraulic actuation sets the support diameter against the bore while the reel's subsequent rotation remains driven by the downstream machine.
Guided segment movement
Tapered dovetail connections and radial guides locate the expanding plates. As the mandrel opens or contracts, the guides control the direction of travel and restrain axial displacement, keeping the segments positioned along their intended expansion path.
Welded-box support structure
The main body uses a welded-box construction to support the bearing-mounted mandrel. During repeated starts and stops imposed by the pulling machine, the box frame provides the stationary mounting structure for the reel assembly and its coil load.

Custom Unpowered Decoiler
Yuanding develops the Custom Unpowered Decoiler from your coil dimensions and the arrangement of the downstream pulling equipment. The selected mechanical configuration and accessories are manufactured to the project drawing as one coordinated pay-off assembly.
Customizable Items
• Light- or heavy-duty construction
• Single- or double-head arrangement
• Disc-brake damping device
• Front outboard support bearing
• Coil hold-down arm
• Machine colour and OEM nameplate
Key Specifications
|
Parameter |
Specification |
|
Power Type |
Unpowered (external pull) |
|
Drive Source |
Pulled by feeder or leveler |
|
Mandrel Structure |
Cantilever type with external support |
|
Core Expansion |
Hydraulic with four segmented plates |
|
Optional Add-on |
Damping device or brake for tension control |
|
Frame |
Welded box structure |
Quality Control
Raw materials, bearings and hydraulic components pass through incoming inspection. Manufactured parts are checked against the drawings before the decoiler is assembled.
The hydraulic assembly is inspected before the completed machine enters its operating trial. Factory acceptance is completed before the equipment is prepared for transport.
Third-party inspectors are accepted at the factory. Full pre-packing inspection is available on request, and progress photographs or videos can be supplied during the build.
FAQ
Q: Is a sample machine available?
A: The decoiler is manufactured as production equipment rather than supplied as a sample unit.
Q: What is the minimum order quantity?
A: The minimum order quantity is one decoiler.
Q: Can it actively rewind a finished coil?
A: Active rewinding requires a driven take-up machine, not this pull-off configuration.
Q: Which downstream data define the required pulling duty?
A: Use the available pulling force, feed acceleration and strip speed, together with the coil geometry.
Hot Tags: unpowered decoiler, China unpowered decoiler manufacturers, suppliers, factory, Heavy Duty Decoiler, Strut Type Hydraulic Decoiler, Wedge Type Hydraulic Decoiler, Automatic Tube Feeding Machine, Unpowered Decoiler, Wedge Type Hydraulic Decoiler With Trolley