Hydraulic Decoiler with Trolley

Send Inquiry
Hydraulic Decoiler with Trolley
Details
The Hydraulic Decoiler with Trolley is an integrated loading and powered pay-off system for steel-coil processing. It is used at the entry of forming and sheet-processing lines where coils are transferred onto a mandrel before being supplied to downstream equipment.
Category
Feeding Machine
Share to
Description

Product Overview

 

Yuanding's Floor Decking Machine is a coil-fed roll forming line for profiled steel decking used beneath concrete floor slabs. It produces deck panels for multi-storey commercial buildings, industrial floors and parking structures, where the steel sheet forms the permanent underside of the slab assembly.

product-1920-1080

Key Advantages

 

 

5–15 tonne coil configurations

The system handles coil weights from 5 to 15 tonnes and widths up to 1,800 mm. During transfer of a wide steel coil, the trolley carries the package up to the mandrel; the matched decoiler then supports the same load during payout, connecting the loading and running stages within one rated assembly.

600 mm lift and 800 mm horizontal strokes

The hydraulic trolley provides up to 600 mm of vertical stroke and 800 mm of forward-and-back movement. Loading separates bore-height alignment from mandrel insertion, allowing the coil to approach the shaft on a supported platform.

Polyurethane-lined coil cradle

Polyurethane pads cover the cradle's coil-contact surface. When the loaded trolley starts, stops or changes height, the lining increases contact grip and separates the outer coil wrap from the bare steel support surface.

Motor-driven variable-frequency payout

A variable-frequency motor drives the expanded mandrel through a gearbox. Once the coil is loaded and the trolley has withdrawn, the drive actively supplies strip to the next machine instead of leaving the entire reel acceleration to downstream pulling force.

 

product-1080-810

Custom Hydraulic Decoiler with Trolley

Yuanding develops the Custom Hydraulic Decoiler with Trolley from your coil data and installation drawing. The trolley geometry and machine interfaces are incorporated into the configured production build, with control and branding requirements defined for the project.

Customizable Items

• Trolley load rating

• Project-specific lifting stroke

• Cradle width

• Optional sensor and PLC package

• Operator-cabinet location

• Machine colour and OEM nameplate

Key Specifications

 

Parameter

Value

Expansion Mechanism Precision Wedge Type
Loading System Motorized Coil Car with Hydraulic Lift
Weight Capacity 5,000kg - 10,000kg
Expansion Range 480mm - 520mm
Synchronized Control PLC-based Centralized Control Panel

 

Quality Control

 

 

Materials and purchased components are inspected before production. Manufactured parts are checked before the decoiler and trolley are assembled into the completed system.

The assembled hydraulic connections and electrical cabinet are inspected before commissioning. The equipment is trial-run and accepted before shipment.

Third-party inspectors are welcome at the factory. A full pre-packing inspection is available on request, with build progress documented through photographs or video.

 

FAQ

 

Q: What is the minimum order quantity?

A: The minimum order is one complete system.

Q: What payment currencies do you accept?

A: USD and EUR, with 30% paid in advance and 70% as the balance.

Q: Can the installed decoiler move sideways for centring?

A: Yes. The machine frame includes hydraulically driven lateral travel.

Q: What warranty is supplied with this system?

A: The decoiler-and-trolley system carries a one-year warranty.

Hot Tags: hydraulic decoiler with trolley, China hydraulic decoiler with trolley manufacturers, suppliers, factory, Heavy Duty Decoiler, Strut Type Hydraulic Decoiler, Wedge Type Hydraulic Decoiler, Automatic Tube Feeding Machine, Unpowered Decoiler, Wedge Type Hydraulic Decoiler With Trolley

Send Inquiry