↵
Product Overview
The Corrugated Board Roll Forming Line turns galvanized or color-coated steel coil into continuous wave-profile sheets. Its output is used for roof covering and exterior cladding on factories, warehouses, commercial buildings and residential structures, including projects supplied through metal-sheet fabrication shops.

Key Features
15–20 m/min Continuous Corrugation
At a published forming speed of 15–20 m/min, successive roll stands generate a repeated wave profile from coil-fed strip. During long production batches with consistent incoming thickness, the continuous feed supports regular sheet geometry without individual press cycles for each wave.
Chrome-Plated 45# Steel Rollers
Rollers manufactured from 45# steel with hard-chrome surfaces contact the galvanized or painted strip along the corrugation path. On exposed roofing sheets, the finished roller surfaces reduce abrasive contact that would otherwise mark decorative coating during repeated forming passes.
PLC Length Setting and Cr12MoV Cutting
Automatic PLC control coordinates forming and hydraulic cut-off, while heat-treated Cr12MoV blades perform the cut. When a roofing order contains repeated specified lengths, the controlled cutting sequence produces ready-to-stack pieces without manual tape-measuring after each panel.

Custom Corrugated Board Roll Forming Line
The forming rolls are designed against the supplied corrugation cross-section and the selected galvanized or painted coil. Yuanding prepares the roll-pass layout and machine arrangement after the profile drawing is approved, then builds the electrical and identification details for the destination factory.
Customizable Items
- Wave pitch
- Wave height
- Profiled sheet width
- Coil feeding width
- Coil grade / coating
- Material thickness range
- Panel cut length
- Edge-lap configuration
- Run-out / stacking layout
- PLC / HMI language
- Electrical supply
- OEM color / nameplate
Key Specifications
| Material | Color-coated steel / Galvanized steel |
|---|---|
| Forming Speed | 15 – 20m/min |
| Roller Material | High-grade 45# steel with hard chrome plating |
| Cutting Blade | Cr12MoV with heat treatment |
| Control | Full-automatic PLC system |
Quality Control
Incoming steel bar, blade stock, bearings and control components are verified against purchase specifications before machining. Coating-sensitive forming parts are protected during storage and handled separately from welded structural frames.
The roll contour is measured against the final wave drawing; chrome-plated working surfaces are inspected for finish defects. Yuanding's published machining procedure also checks forming-shaft runout and Cr12MoV cutting-edge hardness after tempering.
Before dispatch, the complete line is fed with sample steel in the ordered coating family. Finished sheets are checked for wave regularity, surface marks, straightness and programmed cut length, while PLC interlocks and the hydraulic shear are operated under load.
FAQ
Q: Which payment terms are available?
A: 30% deposit and 70% balance.
Q: Which Incoterms do you offer?
A: EXW, FOB and DDP.
Q: How is the line changed over to a different corrugation profile?
A: The quick-change roller system is used to exchange the forming tooling.
Q: What operator training is available when the line is installed?
A: We provide installation assistance and operator training.
Hot Tags: corrugated board roll forming line, China corrugated board roll forming line manufacturers, suppliers, factory, steel silo capacity 2000 ton, steel silo capacity 500 ton, Steel Silo Forming Machine, steel silo rust protection structure, steel silo single compartment storage, steel silo smart monitoring system