↵
Product Overview
The Corrugated Culvert Pipe Machine forms thick corrugated steel plate into curved components for sectional culvert construction. It serves manufacturers supplying highway drainage channels, rail underpasses, bridge rehabilitation projects and buried utility crossings that use corrugated metal pipe or field-bolted plate systems.

Key Features
2.0–8.0 mm Structural Steel Processing
The listed 2.0–8.0 mm thickness window accommodates the heavy plate needed for buried drainage assemblies. When forming corrugations that later carry surrounding soil loads, the machine maintains a defined rib geometry through steel sections far thicker than ordinary roofing profiles.
Project-Matched 200 × 55 mm Corrugation
A 200 × 55 mm pitch-and-depth profile is a published example, with other profiles built to drawing. Along long curved pipe sections, consistent rib pitch keeps adjacent structural plates matched at circumferential and longitudinal interfaces rather than forcing adjustment during field bolting.
20–25 MPa Heavy-Duty Hydraulic System
Hydraulic operating pressure of 20–25 MPa supports the punching and curving stations on this heavy-plate line. Its listed processing-speed range is 5–10 m/min; when producing repeat sections for the same culvert size, the coordinated stations maintain the specified plate sequence through forming and shaping.

Custom Corrugated Culvert Pipe Machine
Yuanding engineers the line around the project plate section, fastening layout and finished curvature. Roller and punch tooling are manufactured from approved drawings, while material strength, hydraulic capacity, transport splits and factory electrical requirements are settled in the equipment specification.
Customizable Items
- Corrugation pitch
- Corrugation depth
- Plate feed width
- Steel grade / coating
- Thickness range
- Segment length
- Curving radius
- Bolt-hole diameter
- Bolt-hole arrangement
- Edge-lap geometry
- Hydraulic arrangement
- Electrical voltage / frequency
Key Specifications
| Material Thickness | 2.0mm – 8.0mm |
|---|---|
| Corrugation Pitch | Custom (e.g., 200mm x 55mm) |
| Processing Speed | 5 – 10m/min |
| Hydraulic System Pressure | 20Mpa – 25Mpa |
| Total Weight | Approx. 30 – 50 Tons |
Quality Control
Incoming frame plate, shaft bar, punch-die steel and hydraulic assemblies are checked against the machine design before machining. Material identification is recorded, and mechanical or electrical components with damaged housings or mismatched nameplates are held from assembly.
Roller forms and punch dies are dimensionally inspected to the intended corrugation and bolt layout. Reinforced bearing seats and hydraulic joints receive alignment and leakage checks before operation, with cutting tools inspected after heat treatment.
The factory trial processes plate within the ordered thickness band. The output is measured for corrugation pitch and depth, bolt-hole registration, cut edge and radius of curvature; the documented results are reviewed during pre-dispatch acceptance.
FAQ
Q: What is the order minimum?
A: One machine line.
Q: How are the heavy units prepared for shipment?
A: Large components are dismantled, labeled for reassembly and protected against moisture.
Q: Is a heavy-duty decoiler included with the line?
A: Yes. The complete production line includes a heavy-duty decoiler.
Q: Can the line be built for plate thicker than 8 mm?
A: Yes. Plate above 8 mm requires a separately engineered machine configuration.
Hot Tags: corrugated culvert pipe machine, China corrugated culvert pipe machine manufacturers, suppliers, factory, industrial forming production line, industrial grain storage silo steel, steel silo enclosed storage system, steel silo insulation system structure, steel silo ladder system, steel silo modular assembly