↵
Product Overview
The Silo Sideboard Production System makes corrugated sidewall panels for circular steel storage vessels. It is used in the manufacture of grain-silo shells, bulk-storage tank walls and large fabricated enclosure panels where curved steel sheets form the main external body.

Key Features
1,000–1,500 mm Feeding Width
The specified 1,000–1,500 mm incoming-strip width accommodates broad sidewall blanks before corrugation. When producing large cylindrical panels, the wider feed allows each sheet to cover an extended shell area while the final usable cover width remains governed by the selected wave and lap dimensions.
22–28 Progressive Forming Stations
A 22–28 station forming arrangement develops the sidewall wave through successive roller contacts. Along long galvanized shell panels, distributing the deformation across many passes reduces abrupt bending at any single stand and helps keep the wave straight before curving.
Hydraulic Post-Cut with PLC Sequencing
The line uses hydraulic post-cutting, with a published total power range of 30–45 kW. During repeated production of panels for one silo circumference, PLC-managed forming, punching and curving operations keep the sheet sequence organized for consistent downstream ring assembly.

Custom Silo Sideboard Production System
Yuanding builds the system from the wall-panel section drawing, the silo diameter and the agreed coil specification. Its roller stations, piercing layout and curvature settings are selected around the finished shell-panel geometry and the available factory floor layout.
Customizable Items
- Corrugation profile
- Material feeding width
- Effective cover width
- Steel grade / coating
- Material thickness
- Panel length
- Bolt-hole pattern
- Longitudinal overlap
- Required shell radius
- Handling / discharge method
- Line layout
- Power supply
Key Specifications
| Feeding Width | 1000mm – 1500mm |
|---|---|
| Material | Cold rolled steel / Galvanized steel |
| Forming Stations | 22 – 28 stations |
| Cutting System | Hydraulic post-cutting, no-deform |
| Power | 30KW – 45KW (Total) |
Quality Control
Galvanized and cold-rolled material specifications are reviewed with the ordered machine design. Purchased drive, hydraulic and control items are checked for matching nameplates and operating ratings before they are installed on the line.
Yuanding measures roll profiles after CNC machining and examines the standing frames for alignment. The hydraulic post-cut assembly is checked at its blade mounting and moving joints, and the drive system undergoes an unloaded rotation check before coil is introduced.
During the loaded factory run, finished sideboards are checked for straight wave lines, edge-wave distortion, hole location, clean cut ends and intended arc. Test measurements and control-panel setpoints are documented as the basis for pre-shipment acceptance.
FAQ
Hot Tags: silo sideboard production system, China silo sideboard production system manufacturers, suppliers, factory, bulk material steel silo storage, high capacity forming line, industrial forming line equipment, industrial shaping forming system, steel silo storage system, welded steel silo