↵
Product Overview
The Support Pillar And Joint Plate Line fabricates formed steel uprights and connecting plates for bolted silo structures. It is used in vertical stiffener production for grain bins and industrial silos, as well as in manufacturing related load-bearing columns and metal connection components.

Key Features
3.0–6.0 mm Heavy-Gauge Capability
The published 3.0–6.0 mm steel-thickness range supports deeper structural sections than light-gauge cladding lines. Where silo uprights transmit shell loading through several bolted courses, the multi-pass former creates the specified column section without relying on separate press bends along the full length.
Multi-Station Hydraulic Punching
The hydraulic punching unit forms repeated attachment holes in connection components. On upright splice joints where multiple fasteners must engage across two adjoining parts, programmed punch spacing maintains the bolt pattern required by the structural drawing.
PLC and Frequency-Controlled Drive
A PLC with frequency conversion governs the roll-forming movement in the stated 8–12 m/min profile-speed range. During production of columns cut to several erection lengths, the controlled feed coordinates line motion and cut-off instead of resetting the drive manually for each section.

Support Pillar And Joint Plate Line Customization
The tooling is designed from the required column section and connection-plate drawings. Yuanding configures the roll flower, die positions and cutoff route to the steel grade and production mix, then finishes the line for the specified supply voltage and customer branding.
Customizable Items
- Upright section shape
- Web / flange dimensions
- Column length
- Connection-plate outline
- Steel grade
- Steel thickness
- Hole diameter
- Hole pitch
- Hole-to-edge distance
- Notch / slot geometry
- Cutoff design
- Control language
Key Specifications
| Material Thickness | 3.0mm – 6.0mm |
|---|---|
| Profile Speed | 8 – 12m/min |
| Punching Unit | Multi-station hydraulic punching |
| Main Shaft Material | 45# High-grade steel |
| Control System | PLC with frequency conversion |
Quality Control
Before fabrication, incoming 45# shaft steel, Cr12MoV die stock and structural frame steel are checked against the design bill of materials. Material markings and purchased hydraulic-component models are retained in the inspection file.
Shaft-seat runout and die geometry are measured before installation; the machined mounting faces of reinforced welded frames are also checked. Hydraulic connections undergo leakage checks, and the electrical cabinet is checked circuit by circuit against the as-built drawing.
A loaded trial forms representative uprights and punches connector-plate samples. The team measures cross-sectional dimensions, hole center spacing, cut length and alignment of overlapping parts before recording the machine's factory acceptance results.
FAQ
Q: How are these machines shipped?
A: Main frames are fixed in export containers; smaller precision parts are boxed.
Q: What currencies do you accept?
A: USD and EUR.
Q: Can one line produce several related upright profiles?
A: Yes. Related profiles are produced using interchangeable rollers or adjustable spacers.
Q: Can operators change the punching pattern from the touchscreen?
A: Yes. The touchscreen changes the programmed hole pattern for the installed punch tooling.
Hot Tags: support pillar and joint plate line, China support pillar and joint plate line manufacturers, suppliers, factory, agricultural steel silo, bottom discharge steel silo, fabrication workshop forming machine, industrial grain storage silo steel, steel silo quality preservation storage, steel silo sealing system