↵
Product Overview
The Spiral Tubeformer is a coil-fed machine for manufacturing straight, round spiral-seam metal ducts. It is used in HVAC duct fabrication shops supplying commercial air-conditioning, building ventilation and industrial air-handling systems.

Key Features
Continuous Coil-to-Tube Forming
Feed rollers and edge-forming stations guide metal strip into the spiral-forming head along one production path. During long runs of the same duct size, the tube is formed directly from coil instead of individual sheet blanks, eliminating repeated blank loading and repositioning of separate tube shells.
Four-Ply Mechanical Lock Seam
The profiled strip edges interlock and are compressed into a four-ply helical seam. When galvanized strip is used for ventilation duct, this mechanical joint closes without a seam-welding pass, avoiding welding heat along the zinc-coated joint.
Programmed Cut-to-Length Production
Length control triggers the cutoff at the programmed tube length. For orders containing repeated straight duct sections, forming and cutting follow the same production sequence, removing individual tape-measure marking and a separate manual cross-cutting operation.
Runout Support for Long Tubes
A runout table carries the emerging duct as it rotates and advances. During production of long straight sections, support along the tube limits the unsupported weight acting at the forming head and keeps the finished duct off the shop floor.

Custom Spiral Tubeformer
We develop the Spiral Tubeformer from your duct drawings, coil specification and workshop layout. The design defines the tooling, coil-handling equipment and selected auxiliary modules as one machine package. Manufacture follows approval of the equipment arrangement and production requirements.
Customizable Items
- Tube diameters and forming-head set
- Strip material and working thickness
- Strip width and decoiler load capacity
- Reinforcing-bead or corrugation unit
- Seam-sealant application unit
- Supply voltage and frequency
- HMI operating language
- Machine color and OEM nameplate
Key Specifications
|
Parameter |
Detail |
|
Material |
Q235 galvanized steel coil |
|
Coil Width |
300 – 1500 mm |
|
Thickness |
≤5 mm |
|
Forming Speed |
6 – 15 m/min |
|
Main Motor |
2 units, 15 kW each |
|
Punching Motor |
5.5 kW servo motor |
|
Wave Pitch Accuracy |
±0.2 mm |
|
Punch Position Accuracy |
±0.5 mm |
|
Machine Size (L×W×H) |
≤30 m × 4 m × 5 m |
|
Power Supply |
380V / 220V, 50Hz |
|
Warranty |
1 year |
Quality Control
Incoming steel, tooling stock and purchased drive and electrical components are checked against the order. Material identification and component models are recorded before parts enter machining or assembly.
Before material is fed, the assembled machine is checked for tooling alignment, drive engagement, cable connections and operating sequences. Alignment and connection defects are corrected before the loaded trial.
Factory acceptance uses trial coil matched to the ordered material and thickness. The acceptance checklist specifies tube roundness, cut-end condition, seam closure and surface condition against the approved duct drawing. Third-party inspection is accepted before shipment.
FAQ
Q: What is the minimum order quantity?
A: One Spiral Tubeformer.
Q: What are the payment terms?
A: 30% advance payment and 70% balance; USD and EUR are accepted.
Q: Can the machine produce elbows, tees and reducers?
A: These fittings require separate fabrication equipment.
Q: How are the finished duct sections joined?
A: With slip couplings, flanges or angle rings specified for the duct system.
Hot Tags: spiral tubeformer, China spiral tubeformer manufacturers, suppliers, factory, Spiral Tubeformer, Connecting Plate Production Line, Steel Silo Corrugated Panel Line, Steel Silo Forming Machine, Water Tank Forming Machine, steel silo
