Z Shape for Strong Frames
A Z Purlin Machine makes Z-shaped steel for building frames. This purlin machine forms steel from 2.0 mm to 4.0 mm thick. The Z Purlin Machine has 18 roller stations for the deep Z shape. The machine makes purlins from 100 mm to 300 mm in height. Many structural steel fabricators use this product for warehouses and factories. The machine has a high strength design for heavy steel.
Multiple Web Widths
The product can change the web width without new rollers. You adjust the side rollers to change the width. The product has a web range of 40 mm to 80 mm. The machine has a 50 ton hydraulic punch for the bolt holes. The punch makes up to 12 holes per purlin. The product has a 40 ton shear for cutting the purlin. The shear has a blade gap adjustment for different steel thicknesses. The machine has a run-out table that supports the purlin after cutting.
Technical Data Table
|
Parameter |
Value |
|
Steel Thickness |
2.0-4.0 mm |
|
Purlin Height |
100-300 mm |
|
Web Width |
40-80 mm |
|
Punch Force |
50 tons |
|
Cutting Force |
40 tons |
Good for Steel Frame Builders
A product makes the exact shape you need for bolted frames. This purlin machine has a 3 year warranty on the gear drive. The product has an automatic oiler for all 18 stations. The machine comes with a set of tools for roller changes. The product has a safety bar across the entry. The bar stops the machine if someone touches it. Buy this product for your structural steel shop. The heavy duty design will handle your thickest steel.
Hot Tags: z purlin machine, China z purlin machine manufacturers, suppliers, factory
