Wave Shape for Roofs
A Corrugated Roofing Machine makes wavy steel sheets for roofs. This roofing machine has 10 roller stations that create a sine wave profile. The Corrugated Roofing Machine forms steel from 0.4 mm to 1.2 mm thick. The wave height is 18 mm from peak to trough. Many roofing contractors use this product for warehouse and barn roofs. The machine runs at 22 meters per minute for fast output.
No Scratch Rollers
The product has adjustable roller gaps on each station. You turn a screw to change the wave pitch. The product has a 200 mm pitch for standard roofs. The machine has a notcher on the entry for the end lap. The notcher cuts a small notch on the side of the sheet. The product has a 10 ton punching unit. The punch makes holes for the roof screws. The punch has a 200 mm spacing for standard roof purlins.
Technical Data Table
|
Parameter |
Value |
|
Steel Thickness |
0.4-1.2 mm |
|
Wave Height |
18 mm |
|
Wave Pitch |
200 mm |
|
Speed |
22 m/min |
|
Punch Spacing |
200 mm |
Good for Barn Builders
A product gives you a consistent wave on every sheet. This roofing machine has a 5 year warranty on the roller shafts. The product comes with a manual for changing steel thickness. The machine has a quick gap adjust for 0.4 to 1.2 mm steel. The product has a foot pedal for jogging the rollers. You use the pedal for threading the steel in. Buy this product for your roof supply yard. The fast speed will let you fill big orders in one day.
Hot Tags: corrugated roofing machine, China corrugated roofing machine manufacturers, suppliers, factory
