Make Wall Panels Fast
A Metal Siding Machine produces panels for building walls. This siding machine takes painted steel coils and forms them into panels. The Metal Siding Machine has 16 roller stations for a deep rib profile. The panels have a 15 mm rib height for strength. Many building material suppliers use this product for warehouse and shed walls. The machine runs at 18 meters per minute.
No Scratch Rollers
The product has polyurethane rollers on the top row. The soft rollers do not scratch the painted surface. The product has a paper feed system that puts a film on the steel. The film protects the paint during forming. The product has a flying cut shear on the output. The shear cuts the panel while the machine runs. You do not stop the machine for cutting. The product has a stacker at the end that collects the finished panels.
Technical Data Table
|
Parameter |
Value |
|
Panel Width |
300-600 mm |
|
Rib Height |
15 mm |
|
Roller Stations |
16 stations |
|
Speed |
18 m/min |
|
Cutting Type |
Flying shear |
Good for Shed Makers
A product makes panels in any length you set. This siding machine has a memory for 50 different lengths. The product changes length in 1 second on the screen. The machine has a 2 year warranty on the polyurethane rollers. The product comes with a roll stand for 5 ton coils. The stand has a brake that stops the coil from spinning too fast. Buy this product for your building supply business. The scratch-free panels will look great on any shed.
Hot Tags: metal siding machine, China metal siding machine manufacturers, suppliers, factory
