Product Overview
The Double-Head Manual Uncoiler is a two-position coil pay-off stand for sheet-metal production. It is used with punching, shelving and door-frame roll-forming lines, particularly in manufacturing schedules that involve frequent replacement of strip coils or changes between material specifications.

Key Advantages
180-degree head changeover
Two spindles are arranged on a central base that rotates through 180 degrees. When the active coil is exhausted, the standby head is already available at the machine, reducing the need to bring a replacement coil to an empty single-head stand.
2,000–5,000 kg capacity per side
Each side is available with a 2,000–5,000 kg load rating for strip widths from 100 to 600 mm. During preparation of successive coils, the two rated positions accommodate the running and replacement coil packages within the same equipment footprint.
Positive rotation locking
A manual pin or foot-operated locking arrangement secures the selected head position. Once a spindle is aligned with the downstream machine, the lock restrains the rotating base rather than leaving the head position dependent on friction at the pivot.
Manual linkage expansion
The mandrel uses a manually operated linkage to grip the coil bore. During changes between prepared coils, the operator adjusts the mechanical expansion directly, without a hydraulic power pack being required for the mandrel-clamping function.

Custom Double-Head Manual Uncoiler
Yuanding builds the Custom Double-Head Manual Uncoiler from the coil-bore dimensions, line position and installation space. The mandrel geometry and machine finish are produced to the supplied drawings and the selected site requirements.
Customizable Items
• Mandrel diameter for non-standard coil bores
• Mandrel working length
• Base and installation dimensions
• Coating system for the operating environment
• Machine colour
• OEM nameplate and identification
Technical Specifications
|
Parameter |
Value |
| Configuration | Dual-spindle 180° Rotating Base |
| Load Capacity | 2,000kg - 5,000kg per side |
| Rotation Lock | Heavy-duty Foot Pedal or Manual Pin |
| Mandrel Expansion | Manual Linkage |
| Material Width | 100mm - 600mm |
Quality Control
Incoming steel and bearings are inspected before production. Manufactured shafts and the welded base are checked against the drawings before final assembly.
In-process inspection continues through assembly of the completed uncoiler. The finished unit undergoes an operating trial at the Wuxi factory before acceptance.
Third-party inspectors are accepted at the factory. Full inspection before packing is available on request, and dispatch follows completion of factory acceptance.
FAQ
Q: What payment terms apply?
A: Payment is 30% in advance and 70% as the balance.
Q: Can I purchase a single uncoiler?
A: Yes. The minimum order quantity is one machine.
Q: Must the line stop before rotating the heads?
A: Yes. Stop and secure the line before head rotation and strip rethreading.
Q: Does the machine automatically join the strip ends?
A: No. Strip joining requires separate equipment.
Hot Tags: double-head manual uncoiler, China double-head manual uncoiler manufacturers, suppliers, factory, coil forming production equipment, Heavy Duty Decoiler, leveling feeding machine system, precision roll forming equipment, Strut Type Hydraulic Decoiler, Wedge Type Hydraulic Decoiler With Trolley
